;**************************************************************************************/ ; ----- camera parameter ----- ; [camera parameter] Camera parameter set for USB2.0 & USB3.0 mode ; ; -- Keyname description: ; CFG_MODE = set the config mode for camera: 0 -> User define(UI) ; 1 -> This config File ; TYPE = set the name of the camera module ; SIZE = set the width and height of the image generated by camera ; BIT_WIDTH = set the bit width of the image generated by camera ; FORMAT = set the format of the image generated by camera: ; | 0 -> RAW | 1 -> RGB565 | 2 -> YUV422 | 3 -> JPG | 4 -> MONO | 5 -> ST_RAW | 6 -> ST_MONO | ; | -- 0 -> RG | -- 0 -> RGB | -- 0 -> YUYV | | | -- 0 -> RG | | ; | -- 1 -> GR | -- 1 -> BGR | -- 1 -> YVYU | | | -- 1 -> GR | | ; | -- 2 -> GB | | -- 2 -> UYVY | | | -- 2 -> GB | | ; | -- 3 -> BG | | -- 3 -> VYUY | | | -- 3 -> BG | | ; I2C_MODE = set the bit width of the address and data of I2C communication: ; 0 -> 8 bit address & 8 bit value ; 1 -> 8 bit address & 16 bit value ; 2 -> 16 bit address & 8 bit value ; 3 -> 16 bit address & 16 bit value ; I2C_ADDR = set the I2C address for register config of camera ; G_GAIN = set the address for green1_gain register config of camera ( RAW & RGB565 & ST_RAW mode ) ; B_GAIN = set the address for blue_gain register config of camera ( RAW & RGB565 & ST_RAW mode ) ; R_GAIN = set the address for red_gain register config of camera ( RAW & RGB565 & ST_RAW mode ) ; G2_GAIN = set the address for green2_gain register config of camera ( RAW & ST_RAW mode ) ; Y_GAIN = set the address for Y_gain register config of camera ( YUV422 mode ) ; U_GAIN = set the address for U_gain register config of camera ( YUV422 mode ) ; V_GAIN = set the address for V_gain register config of camera ( YUV422 mode ) ; GL_GAIN = set the address for global_gain register config of camera ; ; -- Keyname format: ; CFG_MODE = ; ; TYPE = ; SIZE = , ; BIT_WIDTH = ; FORMAT = [, ] ; I2C_MODE = ; I2C_ADDR = ; G_GAIN = [,]
, , ; B_GAIN = [,]
, , ; R_GAIN = [,]
, , ; G2_GAIN = [,]
, , ; Y_GAIN = [,]
, , ; U_GAIN = [,]
, , ; V_GAIN = [,]
, , ; GL_GAIN = [,]
, , ; ; Index value representing certain meanings ; Width of the image generated by camera ; Height of the image generated by camera ; Bit width of the image generated by camera ; I2C address for register config of camera ; Optional address space for this register. Some sensors (mostly SOC's) ; have multiple register pages (see the sensor spec or developers guide) ;
The register address ; Minimale value of certain address ; Maximale value of certain address ; Some form of C-style comments are supported in this .cfg file ; ;**************************************************************************************/ [camera parameter] CFG_MODE = 1 TYPE = MT9N001 SIZE = 640,480 BIT_WIDTH = 8 FORMAT = 0, 3 I2C_MODE = 3 I2C_ADDR = 0x20 TRANS_LVL = 64 ;**************************************************************************************/ ; ----- board parameter ----- ;[board parameter] Board parameter set for USB2.0 & USB3.0 mode ;[board parameter][dev2] Board parameter set for USB2.0 mode ;[board parameter][dev3][inf2] Board parameter set for USB3.0 mode and USB2.0 interface ;[board parameter][dev3][inf3] Board parameter set for USB3.0 mode and USB3.0 interface ; ; -- Keyname description: ; VRCMD = set board parameter by vendor command ; ; -- Keyname format: ; VRCMD = , , , [, [, [, [, ]]]] // ; ; Value representing certain command ; value representing certain meanings ; Index representing certain meanings ; Number of ; Data representing certain meanings ; Some form of C-style comments are supported in this .cfg file ; ;**************************************************************************************/ [board parameter] [board parameter][dev2] VRCMD = 0xD7, 0x4600, 0x0100, 1, 0x00 VRCMD = 0xD7, 0x4600, 0x0100, 1, 0x05 ;VRCMD = 0xF6, 0x0000, 0x0000, 3, 0x03, 0x04, 0x0C [board parameter][dev3][inf2] VRCMD = 0xF3, 0x0000, 0x0000, 0 VRCMD = 0xF9, 0x0000, 0x0000, 0 [board parameter][dev3][inf3] VRCMD = 0xF3, 0x0000, 0x0000, 0 VRCMD = 0xF9, 0x0000, 0x0000, 0 ;**************************************************************************************/ ; ----- register parameter ----- ;[register parameter] Register parameter set for USB2.0 & USB3.0 mode ;[register parameter][dev2] Register parameter set for USB2.0 mode ;[register parameter][dev3][inf2] Register parameter set for USB3.0 mode and USB2.0 interface ;[register parameter][dev3][inf3] Register parameter set for USB3.0 mode and USB3.0 interface ; ; -- Keyname description: ; REG = assign a new register value ; DELAY = delay a certain amount of milliseconds before continuing ; ; -- Keyname format: ; REG = [,]
, // ; DELAY = ; ; Optional address space for this register. Some sensors (mostly SOC's) ; have multiple register pages (see the sensor spec or developers guide) ;
the register address ; the new value to assign to the register ; wait for this ammount of milliseconds before continuing ; Some form of C-style comments are supported in this .cfg file ; ;**************************************************************************************/ [register parameter] REG = 0x0100, 0x0 //Mode Select = 0x0 REG = 0x0300, 0x4 //vt_pix_clk_div = 0x4 REG = 0x0302, 0x01 //vt_sys_clk_div = 0x1 REG = 0x0304, 0x02 //pre_pll_clk_div = 0x2 REG = 0x0306, 0x40 //pll_multiplier = 0x40 REG = 0x0308, 0x08 //op_pix_clk_div = 0x8 REG = 0x030A, 0x01 //op_sys_clk_div = 0x1 DELAY = 1 // Allow PLL to lock REG = 0x3064, 0x805 //RESERVED_MFR_3064 = 0x805 REG = 0x0104, 0x1 //Grouped Parameter Hold = 0x1 REG = 0x3016, 0x111 //Row Speed = 0x111 REG=0x30E0, 0x9A02 REG=0x3126, 0x00FF REG=0x31C6, 0x00FF REG=0x31C8, 0x9A08 REG=0x31CA, 0x00FF REG=0x31C2, 0x00FF REG=0x31C4, 0x00FF REG=0x30F2, 0x9804 REG=0x3128, 0x9802 REG=0x31C0, 0x00FF REG=0x3114, 0x00FF REG=0x30F4, 0x00FF REG=0x30EA, 0x9804 REG=0x31CE, 0x9902 REG=0x30EE, 0x990C REG=0x3106, 0x4C16 REG=0x31CC, 0x00FF REG=0x30FE, 0x644E REG=0x311A, 0x6050 REG=0x3100, 0x6153 REG=0x30E2, 0x00FF REG=0x31D0, 0x00FF REG=0x30E6, 0x00FF REG=0x3102, 0x964E REG=0x310A, 0x9802 REG=0x310C, 0x9802 REG=0x310E, 0x9814 REG=0x3110, 0xA802 REG=0x3112, 0x00FF REG=0x312A, 0x9A02 //BITFIELD=0x3170,0x003F, 0X14 //BITFIELD=0x312C,0x00FF, 0X9C //BITFIELD=0x312E,0x00FF, 0XAA REG = 0x0344, 0x458 // Column Start = 0x8 REG = 0x0348, 0x955 // Column End = 0xDA7 REG = 0x0346, 0x344 // Row Start = 0x8 REG = 0x034A, 0x701 // Row End = 0xA3F REG = 0x3040, 0x04C3 REG = 0x0400, 0x0 // Scaling Mode = 0x0 REG = 0x0404, 0x10 // Scale_M = 0x10 REG = 0x034C, 0x280 // Output Width = 0xDA0 REG = 0x034E, 0x1E0 // Output Height = 0xA38 REG = 0x0342, 0x1200 // Line Length = 0x202B REG = 0x0340, 0x02F5 // Frame Lines = 0xAC7 REG = 0x0202, 0x51D // Coarse Integration Time (OPTIONAL) = 0x0 REG = 0x3014, 0xB1A // Fine Integration Time = 0x56A REG = 0x3010, 0x238 // Fine Correction = 0x100 REG = 0x3018, 0x0 // Extra Delay = 0x0 REG = 0x30D4, 0x1080 // Cols Dbl Sampling = 0x1080 REG = 0x0104, 0x0 // Grouped Parameter Hold = 0x0 REG = 0x0100, 0x1 // Mode Select = 0x1 REG = 0x3012, 0x300 REG = 0x301A, 0x5CCC REG = 0x0206, 0x1a REG = 0x0208, 0x28 REG = 0x020a, 0x28 REG = 0x020c, 0x1a REG = 0x0304, 0x04 REG = 0x0306, 0x40 [register parameter][dev3][inf2] REG = 0x0304, 0x02 // pre_pll_clk_div = 0x6 [register parameter][dev3][inf3] REG = 0x0304, 0x02 // pre_pll_clk_div = 0x3